We have one in our tool truck out on the highway. It works great but with 8 guys they are having it leak. is this just because of to much urine and not enough burn time.
At 2000 watts for one hour to incinerate one use, multipled by four uses per day times 365 days, about what is the estimated cost for a year in the house?
We installed the model CF this summer. The unit works well. There is no leveling ability if the floor is not true. Also, at 20″ to the seat, the unit is a bit high and tippy.
I am interested in your products. Would like further procures or pamphlets to review before purchasing; for transporting to temporary locations My usage would be on hunting trips in isolated locations. Have Generator to facilitate power needs. Family consists of teen age children and female hunting companions who are very “squimish” about ….. using the “OLD STUMP LEANING” methods.
Install was a bit tricky because if the motor not aligned exactly in the right spot, it will rub against the side, or it won’t run at all. Also, when I lined up the motor with the previous pre-drilled holes, it wouldn’t turn at all. I had to jimmy it around for awhile before I found the right alignment to allow it to turn. Also, if the the fan is not set at the proper height, it won’t run — this wasn’t mentioned at all in any install instructions. Once I got it aligned (and drilled new screws to set the motor), it works perfectly.
Price Based Country test mode enabled for testing Canada. You should do tests on private browsing mode. Browse in private with Firefox, Chrome and Safari
Ryan Haberman –
We have one in our tool truck out on the highway. It works great but with 8 guys they are having it leak. is this just because of to much urine and not enough burn time.
Brian Seas –
At 2000 watts for one hour to incinerate one use, multipled by four uses per day times 365 days, about what is the estimated cost for a year in the house?
Dusty (verified owner) –
Great product but shipping cost is too high.
Bob I (verified owner) –
We installed the model CF this summer. The unit works well. There is no leveling ability if the floor is not true. Also, at 20″ to the seat, the unit is a bit high and tippy.
H.azean –
I have a blower motor that works but not burning, which part would i replace to get it going.i have a red lite by the timer.
Robert –
I am interested in your products. Would like further procures or pamphlets to review before purchasing; for transporting to temporary locations My usage would be on hunting trips in isolated locations. Have Generator to facilitate power needs. Family consists of teen age children and female hunting companions who are very “squimish” about ….. using the “OLD STUMP LEANING” methods.
Gardner Lepp (verified owner) –
Install was a bit tricky because if the motor not aligned exactly in the right spot, it will rub against the side, or it won’t run at all. Also, when I lined up the motor with the previous pre-drilled holes, it wouldn’t turn at all. I had to jimmy it around for awhile before I found the right alignment to allow it to turn. Also, if the the fan is not set at the proper height, it won’t run — this wasn’t mentioned at all in any install instructions. Once I got it aligned (and drilled new screws to set the motor), it works perfectly.
Troy or Susan Sullivan –
Ordered the new liners and yes they do work better, still could use more glue but definitely better
Chris D. (verified owner) –
Heater fairly simple to replace. Thermocouple was a little tricky
to get pulled back and out of the way. Next time will know to twist
and pull.
John –
It appears the 240 volt version is more “heavy duty”, as the commentvsays it can handle 6 people full time.
How are it’s power usage different on a per usage basis?
Eg: if one cycle is started at let run to completion will it use 1,800 watt hours like the 120V version, or more?